Audio Accessories
The TP3 can take advantage of the same audio accessories as the Tait TP8000 and TP9000 radios.
Many audio accessories are interchangeable between products featuring the Tait Accessory Interface. This does not apply to data accessories, however. The TP3 uses a direct USB connection, unlike the serial interface of the TP8000 and TP9000 series products.
TP3300/TP3350 radios support TDMA operation. Tait recommends the use of Tait TDMA audio accessories with these radios. Tait TDMA audio accessories have “TDMA” molded into the radio connector. Tait TP8100 audio accessory adapters should only be used with TP3300/TP3350 radios in analog mode.
Selecting the appropriate audio accessories
Noisy Environment?
Setting a higher volume is obviously helpful, but this can be tricky if frequently moving from outdoors to indoors. We recommend the use of in-ear accessories in these circumstances.
Outdoor Operation?
Will the radio be worn on the belt or in a jacket pocket? Wearing it higher is better – it’s easier to hear and better for the radio reception. Consider using a speaker microphone that can be worn on the shoulder. Wired in-ear accessories also help to assure all calls are received. Confidential Calls? You do not want private calls going out on a loud speaker. If you expect calls of a private nature, then an in-ear speaker should be used. If you do not want people to know you are transmitting, then a discreet finger-worn PTT could be used.
Personal Issue?
If staff are to wear in-ear speakers, avoid hygiene concerns by issuing them, instead of sharing. Wired or Wireless? Third party audio accessories can be connected. However, it is often tricky to get reliable pairing, and PTT operation over Bluetooth® can be troublesome. In this case, the radio’s own PTT button can be used to initiate calls – or a wired finger-worn PTT can be used.
1 SPEAKER MIC: MEDIUM WEIGHT
Connects to:
TP3, TP8100, TP9300
9-Pin accessory port
Features:
- 3.5mm jack for earpieces
- Cord: approx. 50cm unstretched
- Rotatable Lapel Clip
Product Code:
T03-00045-FRAA
2 SPEAKER MIC: LIGHT WEIGHT
Connects to:
TP3, TP8100, TP9300
9-Pin accessory port
Features:
- 3.5mm jack for earpieces
- Cord: approx. 50cm unstretched
- Rotatable Lapel Clip
Product Code:
T03-00045-ERAA
3 HEADSET: LIGHT WEIGHT – BEHIND-THE-HEAD
Connects to:
TP3, TP8100, TP9300
9-Pin accessory port
Features:
- Flexible Boom Microphone
- Finger mount PTT
- Lapel Clip
Product Code:
T03-00046-EFAA
4 WIRED FINGER PTT
Connects to:
TP3, TP8100, TP9300
9-Pin accessory port
Designed so the wire can be fitted through clothing – from the radio up to shoulder and then down sleeve to the hand.
Features:
- Finger mounted PTT button
- Used in conjunction with Bluetooth® audio accessories
- Cable length: approx. 1100mm
- Stretches to about 1500mm
Product Code:
T03-00053-0101
5 COVERT KIT EARTUBE-IN-EAR, MIC WITH PTT
Connects to:
TP3, TP8100, TP9300
9-Pin accessory port
Features:
- Transparent in-ear piece
- Mic with Lapel Clip
- PTT on Microphone
- Cord length – approx. 1m
Product Code:
T03-00047-BAAA
6 COVERT KIT EAR HANGER LAPEL MIC
Connects to:
TP3, TP8100, TP9300
9-Pin accessory port
Features:
- The Clip mid-way along the cable to be connected to clothing
- The microphone then clips over the ear (wire from behind)
- Length: Radio to PPT/Clip 900mm
- Length: PTT/Clip to Earpiece 600mm
Product Code:
T03-00047-CBAA
7 EARTUBE IN-EAR 3.5MM
Connection:
3.5mm jack (to RSM)
Features:
- Lapel Clip with transparent ear tube
- Length: about 600mm
- Stretches to about 700mm
- Connection: 3.5mm jack (to RSM)
Product Code:
T03-00120-AAAE
8 EARHOOK 3.5MM
Connection:
3.5mm jack (to RSM)
Features:
- Length: about 600mm
- Stretches to about 700-750mm
Product Code:
T03-00120-BAAE
9 EARTUBE EARHOOK 3.5MM
Connection:
3.5mm jack (to RSM)
Features:
- Lapel Clip with transparent ear tube
- Hooks over the ear
- Length: about 600mm
- Stretches to about 700mm
- Connection: 3.5mm jack (to RSM)
Product Code:
T03-00120-FAAE